.png)
£650.00
+ VAT
The Shadow Solace delivers reliable long-wave infrared warmth through its high performance ceramic emitters, engineered to provide consistent, targeted heating. Designed for use in large or hard-to-heat environments, the Solace emits a gentle radiant heat.
Its linear form and elegant gold finish makes it ideal for spaces where both performance and appearance matter. Whether installed individually or in modular configurations of two or three units, the Solace provides flexible, unobtrusive heating that blends seamlessly into heritage and architectural surroundings.
Perfect for listed buildings, churches, galleries, and design-led interiors, Shadow Solace is part of our specialist heritage and church heating range, combining efficient performance with timeless design.
The Shadow Solace offers flexible installation options to suit your church space and layout. Whether mounted on a wall or ceiling, it provides effective heat distribution while maintaining a sympathetic profile within the environment.
Please Note: As the heating elements within Shadow Solace heaters are individually handcrafted, subtle variations in the level of visible light they emit may naturally occur. This is a normal characteristic of the manufacturing process and has no impact on the warmth or heating performance provided.
Length 750mm
Width 120mm
Depth 130mm
Typical coverage areas obtained from the Solace 20
Note the coverage area is a guide only and is influenced by a number of factors such as the overall ceiling height, draughts from open doors and windows and quality of insulation in the area. Whilst the inner areas will obtain instant heat the outer areas will take longer to warm up. Heat is also subjective and different people feel warm at different heat levels and people who are sat still will need more heat than more active workers. Acceptable coverage is achieved when the heater is mounted within ±15% of the optimal mounting height. Increasing mounting height widens the heat spread but reduces heat intensity, while lower mounting heights increase heat intensity over a smaller area.
| Power (kW) | 2.0kW | 2.0kW |
|---|---|---|
| Dimensions (W) mm | 120mm | 120mm |
| Dimensions (H) mm | 130mm | 130mm |
| Dimensions (L) mm | 750mm | 750mm |
| Coverage (M sq.) | 5.25 | 5.25 |
| Phase supply | Single Phase | Single Phase |
| Voltage (V) | 220-240 | 220-240 |
| Min. distance from side wall (cm) | 50 | 50 |
| Weight (kg) | 5.5 | 5.5 |
| Emitter x power (kW) | 2 x 1000W | 2 x 1000W |
| Long-wave Infrared | Yes | Yes |
| Fitting | wall mounted | hanging |
Tell us about your church and the areas you would like to heat. The information you provide will help our team review your requirements and advise you on the next steps.
Please have the following ready:
* Fields marked with an asterisk are required.
At Shadow Heating, we offer free, no-obligation quotes and expert guidance to help you find the right heating solution for your church or heritage building.
Start by completing our enquiry form, sharing details of your space, heating requirements and electrical supply. Our team will review your answers and contact you to discuss suitable options and the next steps towards your personalised quote.
Where a site survey is appropriate and your electrical supply is suitable for the proposed system, we'll arrange a complimentary visit. Using our advanced 3D imaging camera, we can assess heater positioning and prepare a detailed layout plan to accompany your comprehensive quote.
If you're unsure whether your building has three-phase power, please send us a photo of your incoming electrical supply and main fuse. We can help you identify the likely supply type, explain any further information we may need and guide you through the next steps.
We understand that making changes to churches and heritage buildings can be a complex and lengthy process. From your first enquiry to your final heating plan, we're here to support you at every stage.
If you have any questions or would like to discuss your heating requirements, please call us on 01279 466500. We're happy to help.
Power supply & fuse:
If you are unsure, your electrician or Distribution Network Operator (DNO) may be able to confirm this for you. Please upload a photo of the incoming supply fuse.
Floor plan:
A simple hand-drawn plan is fine. Please include the main dimensions of the building or rooms you would like to heat. If possible, shade or mark the areas that need heating. This is helpful but not essential.
Photographs of the areas you would like to heat:
These might include the nave, chancel, aisles, smaller rooms or kitchen, etc areas you would like to heat, along with a photo of the power supply box.
Single phase 100A
Three phase 80A
Three phase 100A
